What Kinds of Things Can a Drill Press Do?

A drill press is undoubtedly one of the most essential equipment that any woodworker or metalworker can have to their workshop. It has myriad of benefits over the normal handheld drills. A drill press is popular for the efficiency it can precisely provide a woodworker overly accurate hole on the material they’re crafting to furniture. Also, a drill gives you control, perfection and flexibility in all drilling operations. Importantly, a drill press can be attached with other equipment thus being more convenient. So, the question is, what kinds of things can a drill press do? Read on to learn more on that.

Better Control Of Drill Speed

Truth be told, most handheld drill machines allow the user to decrease or increase its speed by exerting pressure to the trigger and holding it at the right angle. However, it’s simpler said than done because maintaining the required drill speed and the drill at its specified angle is not a walk in the park. Consequently, a drill press comes with a fixed handle while its speed is controlled by an adjustable drive belt that’s located in housing above the chuck thus making the whole operation much easier. Also, some modern drill presses come with variable speed motors and stepped pulley system.

Drill Wider Holes

The motor of a drill press is more powerful than those of most related machines. This simply means that a user can apply less energy while drilling holes. Additionally, due to the powerful motor, the drill’s head can be fitted with wider drill bits thus the ability for more accurate wider holes in the given material.

Variable Depth Drill Operations

In some cases, the need for a specific hole depth is needed rather than drilling a completely drilling through a given material. In such an instance, a depth stop is used. A drill press normally comes with a depth stop that sets the drilled hole depth so thus hindering the hole depth from going beyond the pre-set point. In case multiple holes are required, it’s much easier to replicate the process through the drill press than the normal drill equipment.

Mortising

In case you don’t have a mortising tool like a chisel, a drill press can be used to do mortising requirements. Some drill press has mortising attachments that can mortise a rectangle or a square on the intended material. Whereas multiple operations are required to perform a perfect square or rectangle mortise, a drill press can do an awesome job.

Drilling at an Angle

There is several drill presses come with an adjustable table that holds the material you’re drilling. In addition to being adjustable in height, some drill presses have adjustable tables that are settable to varied angles. While a drill bit always points straight down, clamping the material to the table and tilting it slightly, you can come up with an angled hole.

Tapping

Essentially, this is the process of cutting threads into the interior of a hole. It’s always vital to ensure correct tapping lest you cause the bolt or the screw inside the material to be damaged or crooked. Use of a drill press to do the threads makes tapping safer, straighter and a better alternative than using a handheld drill.

Sanding

After drilling, the interior surface of the hole is often rough thus the need to be polished. Since a drilling press possesses various sanding attachments, they can be inserted into the chuck to form a sanding tool. Drilling press sanding best fits the sanding of the inside of newly drilled holes and rounded cuts.

Deburring

After drilling of a hole, the surface where the drill bit penetrates the material remains smooth while the exit one gets chipped and uneven. Using the deburring tool attachment of a drill press can significantly eliminate that issue.

Final Words

A drilling press can accurately perform virtually all the drilling oriented operations that normal drilling device doesn’t come with. It’s much easier to operate, requires less input, possess lots of versatility and untold functionality. Considering all the above things that a drill press do, it’s undoubtedly wise to consider using one. Read our drill press reviews before buying.

Chris

I started TheToolsMaster.com in 2017 out of a desire to create quality content to help people find the best possible tools for their specific job. The site has transformed over the years and now includes tutorials, project ideas, tool vs. tool, and woodworking.

Leave a Comment